2019 the TroPro trade exh…
-
Why the “Origin” button of LCD panel not working
Release Time：2019/06/01Browsing Times：547
Here are the reasons: ● The starting point is set to absolute coordinate in software. Locate on the bottom left corner, the option of “Position” please select to Current positio...
-
How to prepare your files for feeding into the laser program to cut
Release Time：2019/06/01Browsing Times：482
Scenario 1: If the vector has overlapped paths and it will be cut repeatedly. Solution： In RDworks, you can use “Delete overlap” tool to delete all overlapped paths, like...
-
How to prepare your files for feeding into the laser program to engrave
Release Time：2019/06/01Browsing Times：793
Note: the laser machine can only burn into or through material. Also, the beam can only be made to follow straight or curved paths or to burn a grid of dots (a bitmap image). There is no way for ...
-
Engraving problem—how to Improve Engraving Quality in the scan mode of X-swing
Release Time：2019/06/01Browsing Times：744
The engraving quality working on x-swing is generally worse than x-unilateralism, it usually results in ghosting effect or image offset or bi-directional engraving offset, like below. In ...
