2019 the TroPro trade exh…
-
How to remove and install the galvanometer of laser marking machine
Release Time：2021/02/10Browsing Times：515
After the laser marking machine has been used for a period of time, there may be some problems, such as the laser marking machine cannot normally mark, or the light does not come out. After caref...
-
Several principles of laser cutting machine
Release Time：2021/02/03Browsing Times：267
Laser Vaporization Cutting: The use of high energy density of the laser beam heating the workpiece, so that the temperature rise, the material began to vaporize, forming steam. These vap...
-
Control of laser drilling size and precision of laser cutting machine
Release Time：2021/02/01Browsing Times：357
(1) Aperture size control a laser with a small divergence angle (0.001 to 0.003 rad) is used, and a small aperture can be obtained by shortening the focal length or reducing the output en...
-
New era brought by laser cutting machine
Release Time：2021/01/25Browsing Times：368
According to the international safety standards, the laser hazard level is divided into four levels, fiber laser is the most harmful level because of its short wavelength and great harm to...
-
How to use the laser cutting machine to minimize the harm?
Release Time：2021/01/18Browsing Times：392
When new equipment and some high-tech machinery appear, because it is new, there are many differences with the traditional working principle, and the working principle will be more compl...
